Sheet metal processing CNC bending machine operating skills


CNC bending machine equipment for the overall layout of […]

CNC bending machine equipment for the overall layout of three of some: stent, workbench and clamping plate. When used, the coil is energized by the wire, gravitational force is exerted on the pressure plate after power is applied, and then the clamping between the pressure plate and the base is completed. Know how to use the CNC bending machine will feel very simple. Without further ado, let's know how to use the CNC bending machine right now:

    The first step, the first power, turn on the control panel switch, and then start the pump, when you hear the pump change the sound first do not have any operation.

    The second step, stroke adjustment, it is necessary to note when using. Be sure to pass the test before bending. It is necessary to have a plate thickness gap when the upper die is descending to the bottom, otherwise the mold machine is damaged. Stroke conditioning with electric quick adjustment.

    The third step, the choice of bends notch, usually to choose the thickness of 8 times the width of the notch. Such as bending 4mm sheet needs selection of about 32 slots.

    The fourth step, after the hitch adjustments are electric quick adjustment and manual fine-tuning.

    The final step, depressing the foot switch to start bending, CNC bending machine and CNC shearing machine is not the same, can be released at any time, release the foot stopped, then continue to move down. CNC bending machine bending directly, without splicing, without slotting, do not need to use welding rod, the corner surface of its pretty watertight, it will be converted into a fully automatic welding machine operation, improve the quality and improve work efficiency, Reduce labor costs, greatly shorten the cycle of production of goods.